Panels

product-avp

  • Description
  • Advantages & Attributes
  • AVP Properties
  • Allowable Uniform Loads

The AVP panel produces a decorative shadow line creating a distinctive architectural effect with semi-concealed fasteners. Ribs are 1 1/8″ deep and major corrugations spaced 12″ on center. The net coverage of panel is 3′-0 “.

Gauge
  • 26 gauge
  • 24 gauge

 

Length
  • Maximum recommended 40′. Longer lengths available on special order.

 

Dimensions
  • 36″ wide by 1 1/8″ deep

 

Finish
  • Galvalume Plus®
  • Signature® 200 Colors
  • Signature® 300 Colors
Fasteners
  • Various, depending on application.

 

Limitations
  • Installation may be difficult with very thick insulation.

 

Usage
  • Wall panel, liner panel, soffit panel, mansard panel face and back sheet.

Advantages

  1. Attractive architectural application
  2. Eliminating end laps improves appearance and enhances ease of installation
  3. Reduces the potential for oil canning
  4. Reduces glare and the potential for oil canning
  5. Premium paint finishes with 25 year warranty
  6. AVP carries a UL® “Class A” fire rating

Attributes

  1. Semi-concealed fastener panel
  2. Continuous eave to sill until panel exceeds 45′-0″ length
  3. Striations
  4. Optional embossed texture
  5. Signature® 200 and 300 color options
  6. UL “Class A” fire rating

AVP Wall – Section Properties

  NEGATIVE BENDING POSITIVE BENDING
PANEL GAUGE Fy KSI WEIGHT PSF Ixe IN.4/FT. Sxe IN.3/FT. Maxo KIP-IN. Ixe IN.4/FT. Sxe IN.3/FT. Maxo KIP-IN.
26 60* 0.94 0.0262 0.0424 1.5240 0.0247 0.0437 1.5690
24 50 1.14 0.0326 0.0528 1.5810 0.0336 0.0553 1.6560

* Fy is 80-ksi reduced to 60-ksi in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel Structural Members – A2.3.2.

Properties Notes:
  1. All calculations for the properties of AVP panels are calculated in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel Structural Members.
  2. Ixe is for deflection determination.
  3. Sxe is for bending.
  4. Maxo is allowable bending moment.
  5. All values are for one foot of panel width.

Allowable Uniform Loads In Pounds Per Square Foot

drawing_avp

26 Gauge thickness (0.0181″), Fy = 60 ksi, Fu = 61.5 ksi
SPAN TYPE LOAD TYPE SUPPORT SPACING
3 Ft. 4 Ft. 5 Ft. 6 Ft. 7 Ft. 8 Ft. 9 Ft.
1-SPAN Wind Suction 112.91 63.51 40.65 28.23 20.74 15.88 12.55
Wind Pressure 116.22 65.37 41.84 29.05 21.35 16.34 12.71
2-SPAN Wind Suction 110.26 63.42 41.03 28.66 21.13 16.22 12.83
Wind Pressure 77.50 58.12 39.90 27.86 20.54 15.76 12.47
3-SPAN Wind Suction 134.89 78.27 50.86 35.61 26.30 20.20 16.00
Wind Pressure 88.06 66.05 49.48 34.64 25.57 19.64 15.55
4-SPAN Wind Suction 126.85 73.38 47.61 33.31 24.58 18.88 14.95
Wind Pressure 84.76 63.57 46.31 32.39 23.90 18.35 14.53
24 Gauge thickness (0.0223″), Fy = 50 ksi, Fu = 60 ksi
SPAN
TYPE
LOAD
TYPE
SUPPORT SPACING
3 Ft. 4 Ft. 5 Ft. 6 Ft. 7 Ft. 8 Ft. 9 Ft.
1-SPAN Wind Suction 117.14 65.89 42.17 29.28 21.51 16.47 13.02
Wind Pressure 122.64 68.98 44.15 30.66 22.53 17.25 13.63
2-SPAN Wind Suction 117.44 67.29 43.45 30.32 22.34 17.14 13.56
Wind Pressure 96.36 64.41 41.56 28.99 21.35 16.38 12.96
3-SPAN Wind Suction 144.19 83.23 53.94 37.71 27.83 21.36 16.91
Wind Pressure 109.50 79.74 51.62 36.07 26.60 20.42 16.16
4-SPAN Wind Suction 135.42 77.97 50.46 35.26 26.00 19.96 15.80
Wind Pressure 105.39 74.67 48.28 33.72 24.86 19.08 15.10

 

Allowable Uniform Loads Notes:
  1. Allowable loads are based on uniform span lengths and Fy = 50 ksi.
  2. LIVE LOAD is limited by bending, shear, combined shear and bending and web crippling.
  3. Allowable loads consider a maximum deflection ratio of L/180.
  4. The weight of the panel has not been deducted from the allowable loads.
  5. THE ALLOWABLE UNIFORM LOADS ARE NOT FOR USE WHEN DESIGNING PANELS TO RESIST WIND UPLIFT.
  6. Please contact manufacturer or manufacturer’s website for most current allowable wind uplift loads.
  7. The use of any field seaming machine other than that provided by the manufacturer may damage the panels, void all warranties and will void all engineering data.

The engineering data contained herein is for the expressed use of customers and design professionals. Along with this data, it is recommended that the design professional have a copy of the most current version of the North American Specification for the Design of Cold-Formed Steel Structural Members published by the American Iron and Steel Institute to facilitate design. This Specification contains the design criteria for cold-formed steel components. Along with the Specification, the designer should reference the most current building code applicable to the project jobsite in order to determine environmental loads. If fur ther information or guidance regarding cold-formed design practices is desired, please contact the manufacturer.

EFFECTIVE JANUARY, 2014 SUBJECT TO CHANGE WITHOUT NOTICE

  • AVP is a registered trademark of the NCI Group, Inc.
  • Galvalume Plus® is a registered trademark of BIEC International, Inc.
  • Signature® is a registered trademark of the NCI Group, Inc.