Panels

product-fluted

  • Description
  • Uses and Applications
  • Material Specifications
  • Load Span Tables

CF Fluted wall panel provides bold vertical lines complimentary to almost any commercial or industrial building. Inverted ribs in the profile enhance the high-tech industrial look. The CF Fluted wall panel is the recommended profile for the exterior of cold storage buildings.

 

In new and retrofit construction, the panels function as walls, ceilings and roofing for cooler, freezer and food processing buildings. They are ideally suited for:

Cold Storage

  • Cooler Buildings
  • Freezers
  • Food Processing Buildings
  • Dry Goods Warehouses
  • All Controlled Environment Buildings Where Temperature Control and Insulation Values are Critical
Exterior Profile: Flutes 1″ wide and nominal 3/8″ deep
Interior Profile: Mesa wave pattern, nominal 1/8″ deep.
Foam Core: Foamed-in-place, Non-CFC & zero ODP polyurethane, Factory Mutual Class 1 approval.
Thermal Values: R-Values with Air Films   75° Mean 40° Mean
2″ Panel 15.14 17.03
2-1/2″ Panel 18.71 21.29
2-3/4″ Panel 20.49 23.42
3″ Panel 22.27 25.55
4″ Panel 29.42 34.06
5″ Panel 36.56 42.58
6″ Panel 43.71 51.09
• R-Values include the air films on each side of the panel.• 75° Mean based on ASTM C518 Thermal Testing. 40° Mean based on ASTM C1363 Thermal Testing (Values for C1363 based on 4″ panel testing). All values for other thicknesses extrapolated.
Module Width: 30″, 36″ & 42″
Panel Thickness: 2”, 2-½”, 2-¾” , 3” & 4”
(4” panel only available from Mattoon and Jackson facilities)
Panel Lengths: Standard 8’-0” to 40’-0” for 30” and 36” widths.
Standard 8’-0” to 32’-0” for 42” width.
Horizontal Application
Reveal Widths:
1/4″, 1/2″, 3/4″ & 1
Exterior Facings: Stucco embossed, G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 24 Ga. and 22 Ga.
Interior Facings: Stucco embossed, G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 26 Ga., 24 Ga. and 22 Ga.
Standard Exterior: Full-Strength 70% PVDF Fluoropolymer Coating.
Exterior Finishes & Colors: Siliconized Polyester, Fluropon® Full-Strength 70% PVDF Fluoropolymer Coating.Note: Prices may vary by color, gauge and quantity of metal.
Interior Finishes & Colors: USDA-compliant Polyester, Igloo White.
Joint: Offset double tongue-and-groove with extended metal shelf for positive face fastening.
Fastening: Fastener & Clip concealed in the side joint.
FM Approved Class 1 with no height restrictions
CF-42 FLUTED WALL PANEL
PANEL
WIDTH
SPAN
CONDITION
FASTENING
PATTERN
ALLOWABLE CONNECTION LOAD (PSF)
  Panel Span (ft)
5 6 7 8 9 10 11 12 13 14 15
2″ Thick Two Spans Pattern FP1 31.6 25.8 21.7 18.8 16.5 14.8 13.3 12.2 11.2 10.3 9.6
Pattern FP2 46.2 37.7 31.8 27.5 24.2 21.6 19.5 17.8 16.4 14.3 12.5
Pattern FP3 58.3 47.6 40.2 34.7 30.5 26.0 22.1 19.0 16.4 14.3 12.5
Three Or
More Spans
Pattern FP1 89.2 73.0 62.2 54.5 48.6 43.9 40.1 36.9 33.2 36.9 33.2
Pattern FP2 89.2 73.0 62.2 54.5 48.6 43.9 40.1 36.9 33.2 36.9 33.2
Pattern FP3 89.2 73.0 62.2 54.5 48.6 43.9 40.1 36.9 33.2 36.9 33.2
2.5″ Thick Two Spans Pattern FP1 33.3 27.2 22.9 19.8 17.4 15.5 14.0 12.7 11.7 10.8 10.1
Pattern FP2 47.5 38.8 32.7 28.2 24.8 22.1 19.9 18.2 16.7 15.4 14.3
Pattern FP3 60.1 49.0 41.3 35.7 31.4 28.0 25.2 23.0 21.1 19.5 17.3
Three Or
More Spans
Pattern FP1 34.6 28.6 24.4 21.3 18.8 16.9 15.3 14.0 12.9 12.0 11.2
Pattern FP2 49.3 40.8 34.8 30.3 26.8 24.1 21.9 20.0 18.4 17.1 16.0
Pattern FP3 62.4 51.6 44.0 38.3 33.9 30.5 27.7 24.7 21.3 18.5 16.2
3″ Thick Two Spans Pattern FP1 35.1 28.7 24.1 20.8 18.3 16.3 14.7 13.4 12.2 11.3 10.5
Pattern FP2 48.8 39.8 33.6 28.9 25.4 22.6 20.4 18.6 17.0 15.7 14.6
Pattern FP3 61.8 50.5 42.5 36.7 32.2 28.7 25.9 23.5 21.6 20.0 18.6
Pattern FP4 71.1 58.0 48.9 42.2 37.0 33.0 29.7 27.1 24.8 22.9 21.3
Three Or
More Spans
Pattern FP1 36.1 29.9 25.4 22.2 19.6 17.6 16.0 14.6 13.5 12.5 11.6
Pattern FP2 50.2 41.5 35.4 30.8 27.3 24.5 22.2 20.3 18.7 17.4 16.2
Pattern FP3 63.7 52.6 44.8 39.0 34.6 31.0 28.2 25.8 23.7 22.0 20.5
Pattern FP4 73.2 60.5 51.5 44.9 39.7 35.7 32.4 29.6 27.2 23.8 21.0
4″ Thick Two Spans Pattern FP1 43.0 35.3 29.8 25.6 22.5 20.0 18.0 16.4 15.0 13.8 12.8
Pattern FP2 63.0 51.8 43.6 37.6 33.0 29.3 26.4 24.0 22.0 20.3 18.8
Pattern FP3 74.3 61.0 51.5 44.3 38.9 34.6 31.2 28.3 26.0 23.9 22.2
Pattern FP4 79.6 65.4 55.1 47.5 41.7 37.1 33.4 30.3 27.8 25.7 23.8
Pattern FP5 83.3 68.4 57.7 49.7 43.6 38.8 34.9 31.7 29.1 26.8 24.9
Pattern FP9 89.5 73.5 62.0 53.4 46.9 41.7 37.5 34.1 31.3 28.8 26.8
Pattern FP10 93.6 76.9 64.8 55.9 49.0 43.6 39.3 35.7 32.7 30.2 28.0
Three Or
More Spans
Pattern FP1 44.0 36.3 30.9 26.9 23.8 21.3 19.3 17.7 16.3 15.1 14.1
Pattern FP2 64.4 53.2 45.3 39.4 34.9 31.3 28.3 25.9 23.9 22.1 20.6
Pattern FP3 76.0 62.8 53.4 46.5 41.1 36.9 33.4 30.6 28.2 26.1 24.3
Pattern FP4 81.4 67.2 57.2 49.8 44.1 39.5 35.8 32.8 30.2 28.0 26.1
Pattern FP5 85.1 70.3 59.9 52.1 46.1 41.3 37.5 34.3 31.6 29.3 27.3
Pattern FP9 91.5 75.6 64.2 55.6 49.0 43.8 39.6 36.2 33.3 30.8 28.7
Pattern FP10 92.6 75.9 64.2 55.6 49.0 43.8 39.6 36.2 33.3 30.8 28.7
5″ Thick Two Spans Pattern FP1 42.3 35.8 30.3 26.2 23.0 20.4 18.4 16.7 15.3 14.1 13.0
Pattern FP2 61.9 52.5 44.5 38.4 33.6 29.9 26.9 24.4 22.4 20.6 19.1
Pattern FP3 73.1 62.0 52.5 45.2 39.7 35.3 31.7 28.8 26.4 24.3 22.6
Pattern FP4 78.2 66.4 56.2 48.5 42.5 37.8 34.0 30.9 28.3 26.1 24.2
Pattern FP5 81.9 69.4 58.8 50.7 44.5 39.6 35.6 32.3 29.6 27.3 25.3
Pattern FP9 88.0 74.6 63.2 54.5 47.8 42.5 38.2 34.7 31.8 29.3 27.2
Pattern FP10 92.0 78.1 66.1 57.0 50.0 44.5 40.0 36.3 33.3 30.7 28.4
Three Or
More Spans
Pattern FP1 43.5 36.6 31.2 27.1 24.0 21.5 19.4 17.8 16.4 15.2 14.1
Pattern FP2 63.8 53.7 45.7 39.7 35.1 31.5 28.5 26.1 24.0 22.2 20.7
Pattern FP3 75.2 63.3 53.9 46.8 41.4 37.1 33.6 30.7 28.3 26.2 24.4
Pattern FP4 80.6 67.8 57.7 50.2 44.4 39.8 36.0 32.9 30.3 28.1 26.2
Pattern FP5 84.3 70.9 60.4 52.5 46.4 41.6 37.7 34.4 31.7 29.4 27.4
Pattern FP9 90.6 76.2 64.9 56.4 49.9 44.7 40.5 30.7 34.1 31.6 29.4
Pattern FP10 94.8 79.8 67.9 59.0 52.2 46.8 42.4 38.7 35.7 33.0 30.8
6″ Thick Two Spans Pattern FP1 41.7 35.3 30.7 26.6 23.4 20.8 18.7 17.0 15.5 14.3 13.2
Pattern FP2 61.2 51.7 45.0 39.0 34.3 30.5 27.4 24.9 22.8 21.0 19.4
Pattern FP3 72.1 61.0 53.0 46.0 40.4 36.0 32.3 29.4 26.9 24.7 22.9
Pattern FP4 77.2 65.3 56.8 49.3 43.3 38.5 34.6 31.4 28.8 26.5 24.5
Pattern FP5 80.8 68.3 59.4 51.6 45.3 40.3 36.2 32.9 30.1 27.7 25.7
Pattern FP9 86.9 73.4 63.9 55.5 48.7 43.3 39.0 35.4 32.3 29.8 27.6
Pattern FP10 90.9 76.8 66.8 58.0 50.9 45.3 40.7 37.0 33.8 31.2 28.9
Three Or
More Spans
Pattern FP1 42.8 36.3 31.4 27.3 24.1 21.6 19.6 17.9 16.4 15.2 14.2
Pattern FP2 62.7 53.2 46.0 40.0 35.4 31.7 28.7 26.2 24.1 22.3 20.8
Pattern FP3 74.0 62.8 54.3 47.2 41.7 37.4 33.8 30.9 28.4 26.3 24.5
Pattern FP4 79.3 67.2 58.1 50.5 44.7 40.0 36.2 33.1 30.5 28.2 26.3
Pattern FP5 82.9 70.3 60.8 52.9 46.7 41.9 37.9 34.6 31.9 29.5 27.5
Pattern FP9 89.1 75.6 65.4 56.8 50.2 45.0 40.8 37.2 34.3 31.7 29.6
Pattern FP10 93.2 79.1 68.4 59.5 52.6 47.1 42.6 38.9 35.8 33.2 30.9

 

  • Based on CF-42 panel with 26 ga. Flute exterior & 26 ga. Mesa interior face (min Fy = 33 ksi).
  • For Pattern FP1, CF panel clips are fastened to minimum 14 gage steel with (2) 1/4″-14 SDS Tek 3 at interior supports and (1) 1/4″-14 SDS Tek 3 at end supports. For 12 gage or thicker steel, #12-24 SDS or 1/4″-14 SDS Tek 5′s may be used. In lieu of self-drilling screws, self-tapping screws may be used.
  • Fastening patterns FP2, FP3, FP4 and FP5, includes CF panel clip attachment plus 1, 2, 3 or 4 Fabloks, respectively, at supports per panel width. Fab-lok spacing is 10.5″ OC from female edge of panel seam.
  • The through fasteners (FP9) are as follows: #12-24 SDS in min 12 ga. steel; or #1/4-14 SDS in min 12 ga. steel; or #1/4-14 STS in min 14 ga. steel. 4 Fasteners with 5/8″ neoprene bonded washers per panel width @ max 8.4″ OC.
  • The through fasteners (FP10) are as follows: #12-24 SDS in min 12 ga. steel; or #1/4-14 SDS in min 12 ga. steel; or #1/4-14 STS in min 14 ga. steel. 5 Fasteners with 5/8″ neoprene bonded washers per panel width @ max 8.4″ OC.
  • Allowable suction load is the lowest value of panel bending strength, shear strength, deflection limit and connection strength for each fastening pattern.
  • Allowable loads based on panel stress and deflection design criteria are derived from ASTM E72 structural testing and calculated with factor of safety of 2.5 for bending stress, 3.0 for shear stresses and deflection limitation of L/180.
  • The panel connection strength was determined from ASTM E1592 testing and the allowable loads are calculated with factor of safety of 2.
  • The structural capacity of the girts are not considered and must be examined independently.
  • Consult Robertson for recommendations on panel profile and gage suitable for thermal stresses.

 

CF-42 FLUTED WALL PANEL
PANEL
THICKNESS
SPAN
CONDITION
DESIGN CRITERIA ALLOWABLE POSITIVE LOAD (PSF)
  Panel Span (ft)
5 6 7 8 9 10 11 12 13 14 15
2″ Thick Two Spans Bending & Shear 67.6 55.2 46.6 40.2 35.4 31.6 28.6 24.4 20.3 17.2 14.7
Deflection (L/180) 68.9 54.3 44.0 36.3 30.3 25.6 21.9 18.8 16.3 14.2 12.4
Three Or
More Spans
Bending & Shear 66.4 54.7 46.5 40.4 35.8 32.1 29.1 26.6 23.4 20.0 17.3
Deflection (L/180) 69.7 54.8 44.0 36.0 29.8 24.9 21.0 17.8 15.2 13.1 11.3
2.5″ Thick Two Spans Bending & Shear 78.4 64.0 53.9 46.5 40.9 36.5 32.9 30.0 26.9 22.6 19.3
Deflection (L/180) 86.9 69.1 56.4 47.0 39.7 33.9 29.2 25.4 22.2 19.5 17.2
Three Or
More Spans
Bending & Shear 76.7 63.0 53.5 46.4 41.0 36.8 33.3 30.5 28.0 25.7 22.2
Deflection (L/180) 87.9 69.9 56.9 47.1 39.5 33.5 28.6 24.5 21.2 18.4 16.1
3″ Thick Two Spans Bending & Shear 88.1 72.0 60.6 52.3 45.9 40.9 36.9 33.6 30.8 26.6 22.6
Deflection (L/180) 103.2 82.6 67.9 56.9 48.4 41.7 36.2 31.7 27.9 24.7 21.9
Three Or
More Spans
Bending & Shear 86.0 70.6 59.8 51.9 45.8 41.0 37.1 33.9 31.2 28.9 25.4
Deflection (L/180) 104.2 83.5 68.6 57.4 48.6 41.5 35.8 31.0 27.1 23.7 20.9
4″ Thick Two Spans Bending & Shear 94.4 77.3 65.1 56.2 49.3 43.8 39.5 35.9 32.9 30.3 28.1
Deflection (L/180) 129.9 104.9 87.1 73.7 63.3 55.0 48.2 42.7 37.9 33.9 30.5
Three Or
More Spans
Bending & Shear 92.0 75.4 63.8 55.2 48.7 43.5 39.3 35.9 33.0 30.6 28.5
Deflection (L/180) 130.8 106.0 88.0 74.5 63.9 55.4 48.4 42.6 37.7 33.5 29.9
5″ Thick Two Spans Bending & Shear 108.2 88.8 75.0 64.7 56.7 50.5 45.5 41.2 37.7 34.8 32.3
Deflection (L/180) 148.4 120.7 100.8 85.8 74.2 64.9 57.4 51.1 45.7 41.2 37.3
Three Or
More Spans
Bending & Shear 105.5 86.5 73.1 63.2 55.7 49.7 44.9 40.9 37.6 34.8 32.4
Deflection (L/180) 149.1 121.5 101.7 86.8 75.1 65.6 57.9 51.4 45.9 41.2 37.1
6″ Thick Two Spans Bending & Shear 120.7 99.3 84.0 72.5 63.7 56.7 51.0 46.3 42.3 39.0 36.1
Deflection (L/180) 158.3 129.4 108.7 93.0 80.9 71.1 63.1 56.5 50.9 46.1 41.9
Three Or
More Spans
Bending & Shear 117.9 96.8 81.8 70.7 62.2 55.5 50.0 45.6 41.8 38.7 36.0
Deflection (L/180) 158.8 130.1 109.4 93.9 81.7 71.9 63.8 57.1 51.4 46.4 42.2

 

  • Based on CF-42 panel with 26 ga. Flute exterior & 26 ga. Mesa interior faces (min Fy=33 ksi).
  • Refer to the allowable connection load chart, for suction loads, which controls support spacing requirements.
  • Allowable positive load is the lowest value of panel bending strength, shear strength & deflection limit.
  • Allowable loads based on panel stress and deflection design criteria are derived from ASTM E72 structural testing and calculated with factor of safety of 2.5 for bending stress, 3.0 for shear stresses and deflection limitation of L/180.
  • The structural capacity of the girts are not considered and must be examined independently.
  • Consult Robertson for recommendations on panel profile and gage suitable for thermal stresses.