Contact Us: 800-387-5335
Panels

Slimline®

product-slimline

  • Description
  • Slimline – Design Loads

The Slimline® roof panel system offers a sleek contemporary profile ideal for residential applications. This system offers a concealed fastener attachment. Slimline® panels must be specified as striated or striated with minor ribs. Slimline® cannot be endlapped.

Gauge
  • 29 gauge (standard)
  • 26 gauge (optional)

 

Dimensions
  • 16½” wide and 1″ high

 

Finish
  • Galvalume Plus®
  • Signature® 200
  • Signature® 300
Limitations
  • Minimum Slope – 3:12

 

Fasteners
  • Panel Attachment – Concealed Fastening System

12″ Slimline® 29 Gauge – Negative Design Loads

29 GAUGE
SPAN TYPE 1.00 1.50 2.00 2.50 3.00
1592 LOAD 62.40 60.45 57.20 52.65 46.80
DESIGN LOAD 31.20 30.23 28.60 26.33 23.40

16″ Slimline® 24 Gauge – Negative Design Loads

drawing_slimline

24 GAUGE
SPAN TYPE 1.00 1.50 2.00 2.50 3.00
1592 LOAD 98.80 96.20 93.60 85.80 78.00
DESIGN LOAD 49.40 48.10 46.80 42.90 39.00

16″ Slimline® 26 Gauge – Negative Design Loads

26 GAUGE
SPAN TYPE 1.00 1.50 2.00 2.50 3.00
1592 LOAD 78.00 72.80 67.60 62.40 57.20
DESIGN LOAD 39.00 36.40 33.80 31.20 28.60

16″ Slimline® 29 Gauge – Negative Design Loads

29 GAUGE
SPAN TYPE 1.00 1.50 2.00 2.50 3.00
1592 LOAD 62.40 54.00 46.80 43.50 41.60
DESIGN LOAD 31.20 27.00 23.40 21.75 20.80

 

Notes:
  1. The above loads were derived from uplift tests done in accordance with ASTM E-1592.
  2. All values are interpolated from tests performed at spans of 1′-0″, 2′-0″ and 3′-0″.
  3. Test results are highlighted.
  4. Design Load contains a 2.00 factor of safety.
  5. These values do not consider fastener pullout or pullover, clip attachment must be designed separately.
  6. This material is subject to change without notice. Please contact Robertson for most current data.